IDD The positive supply current. I<" />
參數資料
型號: ADG1402BRMZ
廠商: Analog Devices Inc
文件頁數: 6/16頁
文件大?。?/td> 0K
描述: IC SWITCH SPST 1OHM RON 8MSOP
標準包裝: 50
系列: iCMOS®
功能: 開關
電路: 1 x SPST- NC
導通狀態電阻: 2.4 歐姆
電壓電源: 單/雙電源
電壓 - 電源,單路/雙路(±): 5 V ~ 16.5 V,±2.25 V ~ 8.25 V
電流 - 電源: 60µA
工作溫度: -40°C ~ 125°C
安裝類型: 表面貼裝
封裝/外殼: 8-TSSOP,8-MSOP(0.118",3.00mm 寬)
供應商設備封裝: 8-MSOP
包裝: 管件
產品目錄頁面: 801 (CN2011-ZH PDF)
ADG1401/ADG1402
Rev. 0 | Page 14 of 16
TERMINOLOGY
IDD
The positive supply current.
ISS
The negative supply current.
VD (VS)
The analog voltage on Terminal D and Terminal S.
RON
The ohmic resistance between Terminal D and Terminal S.
RFLAT (ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance as measured over the specified
analog signal range.
IS (Off)
The source leakage current with the switch off.
ID (Off)
The drain leakage current with the switch off.
ID, IS (On)
The channel leakage current with the switch on.
VINL
The maximum input voltage for Logic 0.
VINH
The minimum input voltage for Logic 1.
IINL (IINH)
The input current of the digital input.
CS (Off)
The off switch source capacitance, measured with reference to
ground.
CD (Off)
The off switch drain capacitance, measured with reference to
ground.
CD, CS (On)
The on switch capacitance, measured with reference to ground.
CIN
The digital input capacitance.
tON
Delay time between the 50% and 90% points of the digital input
and switch on condition. See Figure 23.
tOFF
Delay time between the 50% and 90% points of the digital input
and switch off condition. See Figure 23.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching. See Figure 24.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch. See Figure 26.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental. See Figure 27.
AC Power Supply Rejection Ratio (ACPSRR)
ACPSRR measures the ability of a part to avoid coupling noise and
spurious signals that appear on the supply voltage pin to the
output of the switch. The dc voltage on the device is modulated
by a sine wave of 0.62 V p-p. The ratio of the amplitude of the
signal on the output to the amplitude of the modulation is the
ACPSRR. See Figure 19.
相關PDF資料
PDF描述
GRM2165C1H330GZ01J CAP CER 33PF 50V 2% NP0 0805
GRM2165C1H330GZ01D CAP CER 33PF 50V 2% NP0 0805
ADG1414BCPZ-REEL7 IC SW SPST 9.5OHM RON 24LFCSP
VE-B40-CU-F4 CONVERTER MOD DC/DC 5V 200W
GRM319F51H334ZA01J CAP CER 0.33UF 50V Y5V 1206
相關代理商/技術參數
參數描述
ADG1402BRMZ-REEL7 功能描述:IC SWITCH SPST 1OHM RON 8MSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 模擬開關,多路復用器,多路分解器 系列:iCMOS® 標準包裝:1,000 系列:- 功能:多路復用器 電路:1 x 4:1 導通狀態電阻:- 電壓電源:雙電源 電壓 - 電源,單路/雙路(±):±5V 電流 - 電源:7mA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-SOIC(0.154",3.90mm 寬) 供應商設備封裝:16-SOIC 包裝:帶卷 (TR)
ADG1404 制造商:AD 制造商全稱:Analog Devices 功能描述:2з Max On Resistance, 【15 V/12 V/【5 V 4:1 iCMOS⑩ Multiplexer
ADG1404YCPZ-500RL7 制造商:AD 制造商全稱:Analog Devices 功能描述:2з Max On Resistance, 【15 V/12 V/【5 V 4:1 iCMOS⑩ Multiplexer
ADG1404YCPZ-REEL 功能描述:IC MULTIPLEXER 4X1 16LFCSP RoHS:是 類別:集成電路 (IC) >> 接口 - 模擬開關,多路復用器,多路分解器 系列:iCMOS® 標準包裝:1 系列:- 功能:開關 電路:2 x SPST - NC/NO 導通狀態電阻:8 歐姆 電壓電源:單電源 電壓 - 電源,單路/雙路(±):2.3 V ~ 4.3 V 電流 - 電源:1µA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-UFQFN 供應商設備封裝:8-迷你型QFN(1.4x1.4) 包裝:剪切帶 (CT) 其它名稱:DG2738DN-T1-E4CT
ADG1404YCPZ-REEL7 制造商:Analog Devices 功能描述:+/-15V 4:1 MUX WITH RON MAX = 2 OHM - Tape and Reel